2008 Honda Sh 125-7

Front Tyre worn close to the legal limit (4.1.3(ii))

no oil registering on dip stick

Front Brake lever cannot be applied smoothly (3.1.3d)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Tyre worn close to the legal limit (4.1.3(ii))

no oil registering on dip stick

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

drive bearings noisy

speedo not working

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear tyre has a puncture

Front Brake disc(s) slightly worn (3.2.A1l)

speedo cable broken

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Handlebar deformed (2.1.1b)

Rear position lamp incorrect colour (1.1.2b)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Brake lever is short but brake can still be readily applied (3.1.3c)