MOT Status
ExpiredMileage
83,453 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal has insufficient reserve travel (1.1.2 (a))
Brake servo defective or ineffective brake pedal sinking too floor under pressure (1.1.10 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Brake pedal wearing smooth anti-slip rubber worn on edge (1.1.2 (c))
Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))
Engine bay covers obscuring some components
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush separating (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect damp (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction sat nav holder (3.1 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush separating (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Brake master cylinder defective but brake still operating pedal fading to floor (1.1.10 (b) (i))
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Registration plate lamp not working (1.1.C.1d)
Boot space full obscuring some components in area
Engine bay covers fitted obscuring some components in area
Front Brake pad(s) wearing thin (3.5.1g)
High parking brake lever travel
Items removed from driver's view prior to test
Nearside Front Road wheel with a slightly distorted bead rim inner rim (4.2.A.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Boot space full obscuring some components in area
Engine bay covers fitted obscuring some components in area
Front Brake pad(s) wearing thin (3.5.1g)
High parking brake lever travel
Items removed from driver's view prior to test
Nearside Front Road wheel with a slightly distorted bead rim inner rim (4.2.A.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too high (1.8)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear position lamp(s) not working (1.1.A.3b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
advise front wiper blades
advise handbrake adjusting
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
advise front wiper blades
advise handbrake adjusting
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Power steering component(s) has slight seepage from a component (2.3.3b)
heater hose joint leaking
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Power steering component(s) has slight seepage from a component (2.3.3b)
heater hose joint leaking
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HW08 ERK is a 2008 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 44.4%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HW08 ERK, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HW08 ERK?
You can check the full history of HW08 ERK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HW08 ERK registered?
HW08 ERK is a 2008 Ford Ka, first registered on 1 March 2008.
Is HW08 ERK safe to buy?
The MOT history for HW08 ERK shows 18 tests with a 44.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HW08 ERK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HW08 ERK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.