2001 Mazda 626

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement trailing (5.3.4 (a) (i))

Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement trailing (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive floorpan (7.1.1 (a) (i))

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened and all suspension components (2.4.G.1)

Vehicle structure has slight corrosion all over (6.1.A.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill and inner arch (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded Sill and inner arch (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened and all suspension components (2.4.G.1)

Vehicle structure has slight corrosion all over (6.1.A.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Upper Coil spring mounting corroded but not seriously weakened both (2.4.C.3c)

Rear Brake pad(s) wearing thin (3.5.1g)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)

Offside Rear Inner Tyre worn close to the legal limit edge 1.6-2mm (4.1.E.1)

Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

items removed

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement D-bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement D-bush (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement back bush (2.4.G.2)

Offside Rear Inner Tyre worn close to the legal limit edge 1.6-2mm (4.1.E.1)

Offside Rear rear brake fluctuating, but not excessively (3.7.B.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

items removed

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

n/s front wheel slight binding

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)

Vehicle structure has slight corrosion (6.1.A.1)

offside rear tyre inner edge slightly worn

Vehicle structure has slight corrosion (6.1.A.1)

offside rear tyre inner edge slightly worn

front brake discs starting to get worn on inside faces

rear brake pads getting worn

Front brake disc slightly pitted (3.5.1h)

Rear Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly pitted (3.5.1h)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)