2004 Yamaha YP125

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. (2.3.1)

Headlamp aim too low (1.6)

Steering movement slightly 'notchy' (2.2.1b)

handle bars slightly out of align with front wheel,, recommend check

Steering movement slightly 'notchy' (2.2.1b)

handle bars slightly out of align with front wheel,, recommend check

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. (2.3.1)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly slightly corroded. (2.3.1)

Nearside Rear shock absorber has a light misting (2.4.A.1c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

front brake binding very slightly

headlamp beam image very slightly deminished

Exhaust slightly deteriorated (7.1.1a)

headlam beam images and outputs very slightly deminished

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Headlamp aim too high (1.6)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)