2005 Kia Picanto

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Exhaust has a major leak of exhaust gases at flexi (6.1.2 (a))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Coil spring corroded both rear (5.3.1 (b) (i))

Coil spring corroded both rear (5.3.1 (b) (i))

Front both

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Sub-frame corroded but not seriously weakened inc suspension arms (5.3.3 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))

underside corrosion inc axle and suspension arms

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))

underside corrosion inc axle and suspension arms

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Clutch pedal heavy operation and high biting point

Front Brake disc worn, pitted or scored, but not seriously weakened inner faces (1.1.14 (a) (ii))

Front Upper slight movement in suspension top rubber mount

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Side repeater slightly discoloured (4.4.3 (a))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear axle corroded

Offside Side repeater slightly discoloured (4.4.3 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe slightly corroded Nearside and offside rear (3.6.B.2c)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Suspension arm corroded but not seriously weakened Nearside and offside front (2.4.G.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Front brake caliper slightly binding.

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)