2002 BMW F Series

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced front fork stiffening brace plate bolts loose Repaired at station. (6.1.1 (b) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Shock absorber has a light misting of oil r/h fork (5.3.2 (b))

Suspension corroded but not seriously weakened rear shock (5.3.3 (b) (i))

Exhaust noisy (7.1.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Registration plate incorrect (6.3.1a)

Steering movement slightly 'notchy' (2.2.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Drive chain sprocket slightly worn (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Fuel cap sealing washer deteriorated (7.2.2c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

front tyre near wear limit rear brake binding slightly but not affecting performance

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

front tyre near wear limit rear brake binding slightly but not affecting performance

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front wheel bearings have excessive free play (2.3.5b)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)