2003 Piaggio Zip

Front Brake disc(s) is slightly distorted (3.2.A1m)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Rear Tyre tread not clearly visible (4.1.3(i))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Exhaust is leaking and excessively noisey (7.1.1b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front suspension has a slightly reduced damping effect (2.3.6c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp deteriorated but function not impaired (1.2.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear mudguard loose.

seat does not lock down.

Exhaust is leaking and excessively noisey (7.1.1b)

Front suspension assembly component excessively bent (2.3.1)

Handlebar deformed (2.1.1b)

Offside Front Direction indicator not working (1.5.1c)

Offside Rear Direction indicator flashing more than 120 times per minute (1.5.1c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp deteriorated but function not impaired (1.2.3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

rear mudguard loose.

seat does not lock down.

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(i))

front panel damaged has fastners missing

nearside indicator outer len's damaged

offside indicator outer len's missing

various bolts missing from clutch cover.

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Fuel cap sealing washer missing (7.2.2c)

Headlamp aim too low and too far to the left. (1.6)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp dipped beam flickers when tapped lightly by hand (1.2.2c)

Horn not working (1.7.3a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear position lamp adversely affected by the operation of another lamp (1.1.3b)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Brake caliper(s) securing bolt(s) missing (3.2.A1j) DANGEROUS

Registration plate insecure (6.3.1b) DANGEROUS

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(i))

front panel damaged has fastners missing

have not carried out brake testing as unsafe to do so, due to condition of braking systems.

nearside indicator outer len's damaged

offside indicator outer len's missing

rear brake cable clamp hanging down on rear wheel.

rider footplate fastners missing also not fitted corretly.

various bolts missing from clutch cover.

rear mudguard/no plate mount insecure,held on only with tape on one side,which could lock up rear wheel.

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension has a slightly reduced damping effect (2.3.6c)

fastner missing from front panel

Headlamp aim too low (1.6)

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b) DANGEROUS

Rear Roller brake test indicates a sticking brake (3.3.A1a) DANGEROUS

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension has a slightly reduced damping effect (2.3.6c)

fastner missing from front panel.

light switch very stiff to operate