2004 Piaggio Zip

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Registration plate insecure (0.1 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Brake master cylinder leaking FRONT CALIPER (1.1.10 (b) (ii)) DANGEROUS

Front inner leg shield loose

Front Shock absorber has negligible damping effect (5.3.2 (b))

Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Rear reflector missing (4.8.2 (a) (ii))

Front inner leg shield loose

Front Brake binding but not excessively slight front wheel bind (1.2.1 (f))

Offside Front Brake lever is bent but brake can still be readily applied front lever bent (1.1.2 (d))

Headlamp not working on dipped beam main working no dip - bulb blown (4.1.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Registration plate insecure only 1 screw holding reg plate (0.1 (a))

Registration plate lamp missing in the case of a single lamp or all lamps no reg light fitted (4.7.1 (b) (ii))

Stop lamp likely to become detached screws missing from light (4.3.1 (c) (ii))

Front Brake binding but not excessively slight front wheel bind (1.2.1 (f))

Offside Front Brake lever is bent but brake can still be readily applied front lever bent (1.1.2 (d))

Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear position lamp damaged and function impaired (1.1.1b)

Rear position lamp insecure (1.1.1c)

Riders seat insecure (6.2.1a)