2007 Aprilia Mojito 125

Exhaust slightly loose Bolt missing from exhaust mount but system still supported. (6.1.2 (a))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Noise from rear wheel when rotated, suspected gearbox bearing.

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust slightly loose Bolt missing from exhaust mount but system still supported. (6.1.2 (a))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Headlamp aim too high (4.1.2 (a))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Noise from rear wheel when rotated, suspected gearbox bearing.

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Bolt missing from exhaust mount, exhaust still supported.

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Noise from rear wheel when rotated suspected gearbox bearing.

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Steering headbearing excessively stiff or notchy Notchy. (2.2.2 (f) (i))

Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Bolt missing from exhaust mount, exhaust still supported.

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Front Brake pad(s) close to minimum limit Inner pad wearing low. (1.1.13 (a))

Front Wheel bearing has slight play Slight roughness when rotated. (5.1.3 (a) (i))

Rear Shock absorber has a slightly worn bush Lower bush has slight play. (5.3.2 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Wheel alignment incorrect which adversely affects the steering Steering out of alignment. (2.4 (a))

Front Brake pad(s) close to minimum limit Inner pad wearing low. (1.1.13 (a))

Front Wheel bearing has slight play Slight roughness when rotated. (5.1.3 (a) (i))

Rear Shock absorber has a slightly worn bush Lower bush has slight play. (5.3.2 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Rear tyre pressure low.

Steering headbearing slightly stiff or notchy Slight notch. (2.2.2 (f) (i))

Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Rear tyre pressure low.

Steering headbearing slightly stiff or notchy Slight notch. (2.2.2 (f) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

STRONG ADVISE Noise from gearbox/drive train when rear wheel is rotated.

STRONG ADVISE Rear exhaust box in very poor condition, mounting bolt missing and mount is cracked. System is still supported.

Wheel alignment slightly misaligned STRONG ADVISE Front suspension geometry is slightly out noticeable on road test but enough to effect braking or steering. (2.4 (a))

speedo not working

Nearside Front Handlebar deformed but serviceable handle bar shroud plastic (2.2.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

speedo not working

Horn not working (7.7 (a) (ii))

Nearside Front Handlebar deformed but serviceable handle bar shroud plastic (2.2.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

speedo not working

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Headlamp aim too low new light fitted (4.1.2 (a))

Nearside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too high (1.6)

Headlamp aim too low (1.6)

Fuel cap sealing washer missing (7.2.2c)

Headlamp masks/converters fitted

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front shock absorber has light misting of stanchion (2.3.3)

Headlamp aim too high (1.6)

Front shock absorber has light misting of stanchion (2.3.3)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp masks/converters fitted