2007 Rieju RS2 50

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Fairings insecure but not likely to impede the steering (2.1.2e)

Steering headbearing has slight free play (2.2.2)

chain slack

dipped beam and main beam very dim unless held at full throttle

radiator bolt missing

rear brake caliper has a lot of movement

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride chain locking devise worn and loose (6.2.1h)

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking frame bolts loose (6.1.1c)

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Fairings insecure but not likely to impede the steering (2.1.2e)

Steering headbearing has slight free play (2.2.2)

dipped beam and main beam very dim unless held at full throttle

radiator bolt missing

rear brake caliper has a lot of movement

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Front wheel bearings are slightly rough (2.3.5b)

clutch lever pivot slightly loose

exhaust silencer fouling slightly on rear swing arm cover

front brake fluid resevoir damp

headlamps dim on tickover

lower exhaust mounting fractured

n/s handle bar grip slightly loose

side stand bracket fractured

throttle assembly slightly loose

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Front wheel bearings are slightly rough (2.3.5b)

clutch lever pivot slightly loose

exhaust silencer fouling slightly on rear swing arm cover

front brake fluid resevoir damp

headlamps dim on tickover

lower exhaust mounting fractured

n/s handle bar grip slightly loose

side stand bracket fractured

throttle assembly slightly loose

Front wheel spindle securing nut locking device insecure (2.3.3a)

Throttle operating incorrectly (6.2.1f)

Front wheel bearings are slightly rough (2.3.5b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

headlamps dim on tickover

Fairings so located that it is likely to impede the steering front brake and clutch foul on fairing (2.1.2e)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Throttle operating incorrectly sticking (6.2.1f)

Front wheel bearings are slightly rough (2.3.5b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

headlamps dim on tickover

split pin in gear change missing

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Brake back plate(s) insecure (3.2.A1j)

Rear Direction indicator insecure (1.5.3b)

Rear Exhaust mounting missing (7.1.1c)

Rear Footrest insecure (6.2.1a)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Registration plate deteriorated (6.3.1d)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake master cylinder insecurely mounted (3.2.B1a)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bush has slight free play (2.4.A2a(i))

Brake master cylinder insecurely mounted (3.2.B1a)

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Brake pedal mounting insecure (3.1.2a)

Direction indicator not working (1.5.1c)

Headlamp aim too low (1.6)

Nearside Front Footrest insecure (6.2.1a)

Nearside Rear Footrest missing (6.2.1a)

Offside Front Footrest insecure (6.2.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bush has slight free play (2.4.A2a(i))

front fairing damaged

rear brake pedal damaged and bent

Front Front suspension fouling which affects the movement of the front suspension. (2.3.6a)

Rear Footrest missing (6.2.1a)

front fairing damaged

rear brake pedal damaged and bent