2008 Jinlun Jl

Drive chain slightly tight (6.2.1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear brake slightly binding

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension has a slightly reduced damping effect (2.3.6c)

Lower Exhaust slightly deteriorated (7.1.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Rear Drive chain sprocket carrier worn to excess (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension has a slightly reduced damping effect (2.3.6c)

Lower Exhaust slightly deteriorated (7.1.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Exhaust slightly deteriorated (7.1.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Steering movement slightly 'notchy' (2.2.1b)

Brake lever cannot be applied smoothly (3.1.3d)

Drive chain excessively loose (6.2.1d)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Wheel alignment incorrect which adversely affects the handling (2.5.1)

Position lamp switch faulty (1.1.4a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Exhaust slightly deteriorated (7.1.1a)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

slight movement in swinging arm bushes.

Drive chain excessively loose (6.2.1d)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Offside Front Footrest insecure (6.2.1a)

Rear Brake pedal mounting insecure (3.1.2a)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)