2008 Ford Ka

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength floor pan (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Silencer (6.1.2 (a))

Suspension component mounting prescribed area is corroded but not considered excessive Both front lower chassis rails / floor pan (5.3.6 (a) (i))

Front Inner sills / floor pan corroded both sides

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Inner sills / floor pan corroded both sides

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel (5.3.6 (a) (i))

Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch around fuel filler (5.2.6)

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded wheel arch around fuel filler (5.2.6)

area behind rear of both sills rusty

both front chassis rails rusty

both front floor panels getting rusty

both front inner wheel arches rusty

both outer sills getting rusty

areas behind rear of sills getting rusty

front chassis rails getting rusty

front floor panels getting rusty

n/s rear outer wheel arch getting rusty around fuel filler

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

n/s front tyre wearing low on outer edge

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

n/s handbrake cable insecure at retaining fitting to sill