2009 Iveco Daily 35S12 SWB

Front Integral body structure is corroded but structural rigidity is not significantly reduced Both sides at bulkhead & body mount areas (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened Lower bolt on sections (5.3.3 (b) (i))

Nearside Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Unable to open sliding door

Note ; Various covers & mouldings fitted , restricting views

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Parking brake performance only just passed at 16 %

Rear Loading doors lower latches faulty / areas corroded , secure at top

Exhaust emissions exceed manufacturer's specified limit 1.01 (8.2.2.2 (a))

Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced Both sides at bulkhead & body mount areas (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened Lower bolt on sections (5.3.3 (b) (i))

Nearside Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Unable to open sliding door

Note ; Brake fluid leaking from calliper piston area , close to Brake disc & Pad friction surface

Note ; Various covers & mouldings fitted , restricting views

Offside Front Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Loading doors lower latches faulty / areas corroded , secure at top

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Headlamp lens slightly defective may affect Dip Beam Image (4.1.1 (b) (i))

Note ; Brake pad wear wires missing front & rear

Note ; Oil leak at intercooler

Note ; Various covers & mouldings fitted , restricting views

Offside Headlamp lens slightly defective may affect Dip Beam Image (4.1.1 (b) (i))

Offside Rear Brake disc has overheated

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Reverse lamps not working

Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake lever has restricted free movement Park Lever at Calliper (1.1.15 (e))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp lens slightly defective may affect Dip Beam Image (4.1.1 (b) (i))

Note ; Brake pad wear wires missing front & rear

Note ; Oil leak at intercooler

Note ; Various covers & mouldings fitted , restricting views

Offside Headlamp lens slightly defective may affect Dip Beam Image (4.1.1 (b) (i))

Offside Rear Brake disc has overheated

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Reverse lamps not working

Front Brake pad wear sensor wires broken / not connected

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Areas of main tread at 2.0 mm (5.2.3 (e))

Note ; Odometer reading odd , suspect incorrect / incomplete

Note ; Various covers & mouldings fitted , restricting views

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Areas of main tread at 2.5 mm (5.2.3 (e))

Offside Rear Wheel has slightly restricted rotation

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Reverse lamps not working

Exhaust emissions exceed manufacturer's specified limit 1.01 (8.2.2.2 (a))

Electrical wiring inadequately secured wiring / fuse box at battery (4.11 (a) (i))

Front Brake pad wear sensor wires broken / not connected

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge Areas of main tread at 2.0 mm (5.2.3 (e))

Note ; Odometer reading odd , suspect incorrect / incomplete

Note ; Various covers & mouldings fitted , restricting views

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Obligatory mirror slightly damaged lower section (3.3 (b) (i))

Offside Obligatory mirror slightly loose (3.3 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Areas of main tread at 2.5 mm (5.2.3 (e))

Offside Rear Wheel has slightly restricted rotation

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Reverse lamps not working

Electrical wiring inadequately secured fuse box & wiring at battery (4.11 (a) (i))

Lighting ; Reverse lamps not working

Nearside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))

Note ; Brake pad wear sensor wires bypassed both sides front & rear

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Exhaust emissions exceed manufacturer's specified limit 1.01 (8.2.2.2 (a))

Fuel cap/sealing device ineffective temporary push fit type fitted (6.1.3 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect kick to offside (4.1.2 (c))

Nearside Side repeater not working on mirror (4.4.1 (a) (ii))

Offside Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect kick to offside (4.1.2 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Side repeater not working on mirror (4.4.1 (a) (ii))

Electrical wiring inadequately secured fuse box & wiring at battery (4.11 (a) (i))

Lighting ; Reverse lamps not working

Nearside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))

Note ; Brake pad wear sensor wires bypassed both sides front & rear

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Headlamp aim beam image obviously incorrect (1.8.A.1b)