2002 Mercedes-benz Vito

Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger (6.1.B.2)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.6.6)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.6.6)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp earth fault (1.1.A.3f)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Anti-roll bar has excessive play in a pin/bush d bush (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pipe excessively corroded both front to rears from load sensing valve forwards (3.6.B.2c)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Subframe mounting prescribed area is excessively corroded subframe mount (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Rear small cut

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Outer sills corroding

Rear crossmember corroding not holed at time of test

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Chassis corroding generally mainly at rear

Front of sills in poor condition

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear registration plate insecure (6.3.1b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Parking brake lever has little reserve travel (3.1.6b)

Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)

Exhaust heat shield insecure

Inner edge of offside front tyre scrubbing

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear registration plate insecure (6.3.1b)

Exhaust heat shield insecure

Inner edge of offside front tyre scrubbing

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Both rear tyre inner edges scrubbed

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside rear tyre tread depth 3mm

Rear Brake load sensing valve linkage stiff (3.6.E.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear coil spring fractured (2.4.C.1a)

Parking brake lever has no reserve travel (3.1.6b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside rear tyre tread depth 3mm

Rear Brake load sensing valve linkage stiff (3.6.E.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Stop lamp not working (1.2.1b)