2007 Hyosung GT 125 R

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Rear wheel spindle securing nut(s) loose (2.4.A.2b)

Drive chain excessively loose (6.2.1d)

Headlamp aim too low (1.6)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Steering headbearing has slight free play (2.2.2)

Throttle cable not retained at top correctly

number plate light not working

Front shock absorber has light misting of stanchion both sides (2.3.3)

Brake lever cannot be applied smoothly (3.1.3d)

Drive chain excessively loose (6.2.1d)

Front Stop lamp remains on when the brake is released (1.3.1e)

Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Nearside Handlebar deformed (2.1.1b)

Offside Handlebar deformed (2.1.1b)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Drive chain worn but not considered excessive (6.2.1e)

Nearside Front Direction indicator damaged but function not impaired (1.5.3a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Clutch lever shortened. (6.2.1g)

Rear Tyre valve stem slightly damaged (4.1.2c)

slight movement in front caliper to yoke

Fairings so located that it is likely to impede the steering (2.1.2e)

Front Brake lever has inadequate reserve travel (3.1.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Rear Tyre valve stem slightly damaged (4.1.2c)

front brake caliper has slight movement around 1 pivot, further investigation advised

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Headlamp switch insecure (1.2.4)

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Front Lower Front suspension assembly slightly corroded. (2.3.1)

Offside Front Lower Front suspension assembly slightly corroded. (2.3.1)

Rear Drive chain sprocket slightly worn (6.2.1e)

Upper Rear suspension bush has slight free play (2.4.A2a(i))

clutch lever broken .

n/s mirror missing .

Drive chain excessively loose (6.2.1d)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too low (1.6)

Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Nearside Front Direction indicator insecure (1.5.3b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Front Direction indicator insecure (1.5.3b)

Offside Front Direction indicator not working (1.5.1c)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Registration plate insecure (6.3.1b)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

nearside mirror missing .nearside front indicator lense missing.

Rear wheel bearings are slightly rough (2.4.A.2c)