2007 Honda Cbr 125 RS-6

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Footrest missing passenger (both) seat fitted. (6.2.12 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Tyre designed for front wheel use fitted to the rear wheel (5.2.3 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust noisy (7.1.2)

Front wheel bearings have slight free play (2.3.5b)

Clutch lever bent (6.2.1g)

Exhaust noisy (7.1.2)

Front Tyre valve stem slightly damaged (4.1.2c)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Clutch lever bent (6.2.1g)

Exhaust noisy (7.1.2)

Front Tyre valve stem slightly damaged (4.1.2c)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

gear lever bent

nearside rear and offside front indicators have been repaired

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

gear lever bent

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

nearside rear and offside front indicators have been repaired

Drive chain slightly tight (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))