2008 Suzuki GN125

Rear Suspension arm attachment bracket/mounting insecure bushes need replacement (5.3.3 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel alignment slightly misaligned (2.4 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel alignment slightly misaligned (2.4 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp aim too low (4.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Nearside Front Footrest insecure (6.2.12 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

front brake reservoir insecure

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Headlamp aim too low (4.1.2 (a))

Headlamp light intensity severely reduced left hand dip (4.1.4 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Headlamp light intensity reduced (4.1.4 (a))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Nearside Front Footrest slightly loose (6.2.12 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Front tyre pressure low

Headlamp masks/converters fitted

Rear tyre perished

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

front tyre slightly perished

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp insecure (1.2.3b)

front tyre slightly perished