2009 Chrysler-jeep Grand Voyager

Exhaust system insecure mount broken (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Upper Macpherson strut mounting damaged and seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Suspension component pin or bush excessively worn Trailing arm bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced underside sill (7.1.1 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component pin or bush slightly worn trailing arm bush (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement trailing bush perished and slightly worn (5.3.4 (a) (i))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement trailing bush perished and slightly worn (5.3.4 (a) (i))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)

Front side reppeter lens missing

eml light on

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Front side reppeter lens missing

eml light on

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Side repeater not working (1.4.A.2c)

Nearside Side repeater has light sources not illuminating, but not more than 50% (1.4.A.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)