2002 Suzuki Carry

Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g))

Headlamp aim unable to be tested due to nsf dip beam not working (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Coil spring corroded both (5.3.1 (b) (i))

Heavy underside corrosion

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

ns and os inner and outer sill corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

both outer sills corroded

underside corrosion

Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

both outer sills corroded

underside corrosion

general underside corrosion

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to legal limit/worn on edge n/s and o/s (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

general underside corrosion

rear sills heavily corroded inner and outer, n/s and o/s

sills damaged

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

general underside corrosion

Front Coil spring corroded n/s and o/s (5.3.1 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

general underside corrosion

Offside rear door outer handle damaged

Rust in nearside sill, but not yet bad enough to fail

Central Rear Stop lamp has less than 50% of the light sources illuminating (1.2.1b)

Nearside Front Windscreen wiper does not clear the windscreen effectively blade split (8.2.2)

Offside rear door outer handle damaged

Rust in nearside sill, but not yet bad enough to fail

Front Brake pad(s) wearing thin (3.5.1g)

Offside Play in steering rack inner joint(s) ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Outer door handle broken on offside rear door, but door can still be opened

Fuel cap/sealing device missing (7.2.4a)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Rear Brake pipe excessively corroded across axle (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Play in steering rack inner joint(s) ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Outer door handle broken on offside rear door, but door can still be opened

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

centre exhaust mount broken

exhaust deteriorating

inner and outer sill panels corroding

oil leak ?

o/s outer sill panel corroding

oil leak ?

shallow cut in n/s/f tyre tread

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Rear Exhaust mounting missing (7.1.1b)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Exhaust system not adequately supported (7.1.1)

both rear tyres getting low