2003 Iveco Dailey

Bonnet catch stiff

Nearside Front Inner sill corroded

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle underside corroded

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Bonnet catch stiff

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Inner sill corroded

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle underside corroded

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Spare tyre defective ()

parking brake limits only just met

various signs of light corrosion to vehicle under side

Brake pedal has insufficient reserve travel (1.1.2 (a))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Spare tyre defective ()

parking brake limits only just met

various signs of light corrosion to vehicle under side

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Nearside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Vehicle structure has slight corrosion (6.1.A.1)

underside of van showing signs of rust

Offside Front Lower Brake pipe excessively corroded (3.6.B.2c)

Offside Front Upper Brake pipe excessively corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

underside of van showing signs of rust

Brake load sensing valve linkage stiff (3.6.E.3)

Brake load sensing valve stiff (3.6.E.3)

rear brake discs worn

rear brakes out of balance

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has a light misting of oil (2.7.3)

bonnet safety catch siezed

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has a light misting of oil (2.7.3)

bonnet safety catch siezed

Nearside Headlamp aim too high and too far to the left. (1.8)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Fuel system component insecure (7.2.1)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too low (1.8)

Service brake: efficiency below requirements (3.7.B.7)