2005 Subaru Forester

Exhaust fumes entering cabin (6.1.2 (b) (i))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced strut top (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security strut top (6.2.2 (d) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Exhaust has a minor leak of exhaust gases section (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge 2.8 mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 3 mm (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive shockabsorber top mounting (5.3.6 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting strut top (6.2.2 (d) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases cat forward section (6.1.2 (a))

Front Exhaust has a minor leak of exhaust gases cat forward section (6.1.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Exhaust has a minor leak of exhaust gases Front up pipe to turbo (7.1.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) not working (1.1.A.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)