2006 Mazda 5

Offside Rear Tyre worn close to legal limit/worn on edge Heavily worn inner edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge Heavily worn inner edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Brake disc worn, pitted or scored, but not seriously weakened all round (1.1.14 (a) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Corrosion to underside of vehicle, chassis & suspension components

DPF Light flashing on dashboard

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d))

Oil leaking excessively from engine (8.4.1 (a) (i))

DPF light flashing

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

sill covers and undertrays fitted

underside and components corroded

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear mounting (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear mounting (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear mounting (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement inner rear mounting (2.4.G.2)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar attachment bracket/mounting bolt missing (2.4.G.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

damage to bodywork

offside front tyre worn on edges

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

damage to bodywork

offside front tyre worn on edges

damage to bodywork

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

damage to bodywork

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

damage to bodywork