MOT Status
ExpiredMileage
54,347 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing areas (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing areas (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill to floor seam (7.1.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Tyre slightly damaged/cracking or perishing both front (5.2.3 (d) (ii))
Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing areas (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing areas (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge devoid of tread on inner edge (5.2.3 (e))
Offside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill to floor seam (7.1.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Tyre slightly damaged/cracking or perishing both front (5.2.3 (d) (ii))
Tyre slightly damaged/cracking or perishing both rear (5.2.3 (d) (ii))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Items removed from driver's view prior to test ()
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing and mounting bracket (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Brake actuating linkage mounting prescribed area is corroded but not considered excessive bulkhead panel seam (1.1.21 (e) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing and mounting bracket (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive centre area of outer sill (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill to floor seam (7.1.1 (a) (i))
Oil leak, but not excessive transmission oil (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
offside front tyre worn on inner edge
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Items removed from driver's view prior to test ()
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing and mounting bracket (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Brake actuating linkage mounting prescribed area is corroded but not considered excessive bulkhead panel seam (1.1.21 (e) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing and mounting bracket (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive centre area of outer sill (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill to floor seam (7.1.1 (a) (i))
Oil leak, but not excessive transmission oil (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
offside front tyre worn on inner edge
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
offside front tyre low pressure
Front Brakes imbalanced across an axle ns90k os150k (3.7.B.5b)
Offside Stop lamp not working (1.2.1b)
Nearside Front coil spring broken (2.4.C.1a) DANGEROUS
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
offside front tyre low pressure
Off side windscreen wiper blade is starting to split, clearing windscreen ok.
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Radiator is slightly damaged, not leaking at time of test.
Rear registration plate is cracked.
Nearside Headlamp not working on dipped beam (1.7.5a)
Off side windscreen wiper blade is starting to split, clearing windscreen ok.
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Radiator is slightly damaged, not leaking at time of test.
Rear registration plate is cracked.
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
o/s/r and n/s/r tyres starting to perish
rear number plate cracked
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
o/s/r and n/s/r tyres starting to perish
rear number plate cracked
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
corrosion on exhaust
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HY08 UFU is a 2008 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HY08 UFU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HY08 UFU?
You can check the full history of HY08 UFU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HY08 UFU registered?
HY08 UFU is a 2008 Ford Ka, first registered on 31 March 2008.
Is HY08 UFU safe to buy?
The MOT history for HY08 UFU shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HY08 UFU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HY08 UFU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.