2015 Peugeot 208

Tyre has a tear, caused by separation or partial failure of its structure both rear (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Outer Integral body structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive outer sill (5.3.6 (a) (i))

Emissions unable to be completed excessive flexi leak of gases (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Oil leaking excessively from engine (8.4.1 (a) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive outer sill (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Headlamp aim unable to be tested bulb not working (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Items removed from driver's view prior to test

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust mounting defective front and rear (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Exhaust mounting defective (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Items removed from driver's view prior to test

Rear Exhaust mounting defective (6.1.2 (a))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))