MOT Status
ValidMileage
118,618 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Non obligatory mirror damaged ()
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions unable to be completed exhaust blow (8.2.2.2 (e))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Non obligatory mirror damaged ()
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2.0mm (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Headlamp lens slightly defective Water (4.1.1 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Trailer electrical socket wiring insulation damaged or deteriorated No wired (4.10 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Steering rack has slight free play detected at steering wheel inner joints (2.3 (a) (i))
Front Window damaged but not adversely affecting driver's view chip (3.2 (a) (i))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp lens slightly defective damp (4.1.1 (b) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of inner arch (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting behind bumper (5.3.6 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Valve stem slightly damaged (5.2.3 (j))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Play in steering rack inner joint(s) ()
Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Horn sound not in accordance with requirements (7.7 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x2 (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))
Offside Front drop link dust covers perished
Subframe mounting prescribed area is corroded but not considered excessive both front inner sills but just out of prescribed area (5.3.6 (a) (i))
Horn not working (7.7 (a) (ii))
Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread cracked (0.1 (b))
Offside Front drop link dust covers perished
Subframe mounting prescribed area is corroded but not considered excessive both front inner sills but just out of prescribed area (5.3.6 (a) (i))
Both Rear Disc's Slightly Pitted
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Both Rear Disc's Slightly Pitted
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
osr tyre wearing unevenly on inside edge
Centre Exhaust mounting missing (7.1.1b)
Horn not working (1.6.2a)
osr tyre wearing unevenly on inside edge
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front brake disc excessively scored (3.5.1h)
Nearside Rear brake disc excessively scored (3.5.1h)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Registration plate lamp not working (1.1.5c)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HY51 BPX is a 2001 Mercedes-benz Vito in Black with a 2,151cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying HY51 BPX, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HY51 BPX?
You can check the full history of HY51 BPX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HY51 BPX registered?
HY51 BPX is a 2001 Mercedes-benz Vito, first registered on 29 November 2001.
Is HY51 BPX safe to buy?
The MOT history for HY51 BPX shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HY51 BPX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HY51 BPX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.