2001 Honda XR400

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings are slightly rough (2.3.5b)

Exhaust noisy (7.1.2)

Rear wheel bearings have excessive free play (2.4.A.2c)

Exhaust noisy (7.1.2)

No lights fitted at time of test

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

off road use

No lights fitted at time of test

Rear Brake disc(s) slightly worn (3.2.A1l)

off road use

Front Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) slightly worn (3.2.A1l)

number plate angle (numbers could easly be miss read

An item not tested (Manual)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre has had the tread recut (4.1.2d)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake performance not tested (3.3) DANGEROUS

Front wheel insecure (4.2.3b) DANGEROUS

number plate angle (numbers could easly be miss read

front disc grinds on caliper reaction bracket

Rear Brake disc(s) slightly scored (3.2.A1l)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Horn control defective (1.7.2a)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre is unsuitable (4.1.1)

Rear reflector on motorcycle missing (1.4.1)

Headlamp damaged but function not impaired (1.2.3a)