MOT Status
ExpiredMileage
173,352 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake performance not tested (1.2.1 (g))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sub frame mounting point (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced subframe mounting (6.1.1 (c) (i))
Offside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Emissions not tested (8.2.2.2 (e))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Emissions not tested (7.3.A.1)
Nearside Suspension component mounting prescribed area is excessively corroded inner/sill (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.3.A.1)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Headlamp aim too high (1.8)
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake load sensing valve linkage stiff (3.6.E.3)
Nail in nearside rear tyre
Nearside Rear Brake hose slightly chafed (3.6.B.4d)
Driver's door cannot be opened from inside the vehicle (6.2.B.1b)
Electrical wiring inadequately supported (1.9.2a)
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Brake load sensing valve linkage stiff (3.6.E.3)
Nail in nearside rear tyre
Nearside Rear Brake hose slightly chafed (3.6.B.4d)
auxilary drive belt system becoming noisy
both front and rear brake discs becoming worn
both rear brake hose furrules becoming corroded
both rear coil springs becoming corroded
nearside front indicator damaged
nearside inner driveshaft boot perished
offside front strut top mounting becoming noisy
offside rear lamp lens damaged
slight play both front anti-roll bar 'D' bushes
slight play both front anti-roll bar drop link ball joints
Nearside Stop lamp not working (1.2.1b)
lower reading from offside hand brake
nearside front tyre worn
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HY51 NUK is a 2002 Mercedes-benz Vito in White with a 2,200cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 57.7%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying HY51 NUK, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HY51 NUK?
You can check the full history of HY51 NUK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HY51 NUK registered?
HY51 NUK is a 2002 Mercedes-benz Vito, first registered on 12 February 2002.
Is HY51 NUK safe to buy?
The MOT history for HY51 NUK shows 26 tests with a 57.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HY51 NUK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HY51 NUK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.