2003 Subaru Impreza

Rear Passenger seat(s) missing at time of test ()

Offside Front Windscreen damaged but not adversely affecting driver's view Small Crack (3.2 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

both rear tyres worn uneven inner edges

cut to offside rear tyre inner sidewall

nearside front tyre wearing inner edge

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt gaiter (6.1.7 (g) (ii))

both rear tyres worn uneven inner edges

cut to offside rear tyre inner sidewall

nearside front tyre wearing inner edge

Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)

Nearside Rear tyre inner sidewall perished

Offside Front Tyre worn close to the legal limit inner edge low (4.1.E.1)

coolant leak

product on headlight lenses

slight play in all anti roll bar D bushes

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

splits in both rear tyres,ply or cord not visible

Front registration plate deteriorated (6.3.1d)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Front Brake pad(s) wearing thin (3.5.1g)

splits in both rear tyres,ply or cord not visible

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

damage to front number plate

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

damage to front number plate

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

rear wiper blade split

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly pitted (3.5.1h)

Front brake disc slightly scored (3.5.1h)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

front tyres wearing on edges & splitting

splits in rear tyres

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Anti-roll bar has slight play in a pin bearing (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nail in offside rear tyre

Rear Anti-roll bar has slight play in a pin bearing (2.4.G.2)

nearside rear tyre wearing inner edge.

offside front tyre worn badly inner edge.

offside rear tyre wearing inner edge