CarVerify

Free Car Check

HY56 ZBZ

2006 Ford Ka

Blue Petrol 1299cc
Search another vehicle

MOT Status

Expired
Expires11 Jul 2019
Tests15 (9 pass, 6 fail)
Pass rate60%

Mileage

63,538 mi
Last recorded63,538 miles
Recorded on5 Jul 2018
Typical for 2006 Ford Ka42,791 mi

Significantly above average — investigate

4 checks still locked for this Ford
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £12.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationHY56 ZBZ
MakeFord
ModelKa
Year2006
ColourBlue
Fuel typePetrol
Engine1,299cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

9 pass 6 fail
Pass 5 Jul 2018 63,538 miles

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

exhaust heat shield loose.

Pass 11 Jul 2017 56,767 miles

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis member (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Fail 6 Jul 2017 56,588 miles

Brake fluid warning lamp illuminated (3.6.G.2)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis member (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Pass 7 Jul 2016 49,571 miles

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis member (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis member (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Fail 7 Jul 2016 49,571 miles

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis member (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis member (2.4.A.3)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Pass 9 Jul 2015 41,963 miles
Fail 9 Jul 2015 41,963 miles

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear wheel bearing rough when rotated (2.6.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Pass 12 Jul 2014 33,737 miles

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Fail 12 Jul 2014 33,737 miles

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Pass 19 Aug 2013 28,446 miles
Pass 1 Sep 2011 22,617 miles

both rear tyres cracking.

Fail 25 Aug 2011 22,464 miles

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

both rear tyres cracking.

noise from offside rear hub.

offside front suspension arm rear bush debonding.

Pass 1 Sep 2010 14,840 miles

Both front tyres worn on edges.

Offside wishbone inner bush deteriorating.

Pass 27 Aug 2009 12,873 miles
Fail 27 Aug 2009 12,873 miles

Nearside Headlamp aim too low (1.8)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear registration plate deteriorated (6.3.1d)

How Reliable is the Ford Ka?

Based on 8,818,307 MOT tests across 675,715 vehicles.

69.1%
Pass Rate
4,496
Miles/Year
29
Year Lifespan
675,715
On UK Roads

Top MOT Failure Points

Suspension component mounting prescribed area is excessively corroded 404,005
Seat belt anchorage prescribed area is excessively corroded 371,413
Tyre tread depth below requirements of 1.6mm 361,801
Suspension arm rubber bush deteriorated resulting in excessive movement 270,876
Windscreen wiper does not clear the windscreen effectively 263,812
Full Ford Ka reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

HY56 ZBZ is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.

Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.

The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HY56 ZBZ, it's worth having these areas checked by a mechanic before committing.

The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.

Frequently Asked Questions

How do I check the history of HY56 ZBZ?

You can check the full history of HY56 ZBZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was HY56 ZBZ registered?

HY56 ZBZ is a 2006 Ford Ka, first registered on 1 September 2006.

Is HY56 ZBZ safe to buy?

The MOT history for HY56 ZBZ shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does HY56 ZBZ have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HY56 ZBZ. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.