MOT Status
ValidMileage
49,784 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes , both sides (5.3.4 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced End sill/ inner /wing (6.1.1 (c) (i))
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced End sill/inner wing (6.1.1 (c) (i))
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Lower Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS
Nearside Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Front Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn n/s and o/s (5.1.2 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor/seat mounting (7.1.1 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor corroded (7.1.1 (a) (i))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced End sill (6.1.1 (c) (i))
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear (5.3.4 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front brake disc worn, pitted or scored, but not seriously weakened corroded and lipped (3.5.1i)
Rear Macpherson strut has slight movement at the upper attachment both (2.5.A.1c)
exhaust system corroded
play in both rear axle bushes
Rear Brakes imbalanced across an axle 53% (3.7.B.5b)
Valve stem seriously damaged ALL FOUR (4.1.D.1e)
play in both rear axle bushes
Front brake disc worn, pitted or scored, but not seriously weakened corroded and lipped (3.5.1i)
Rear Macpherson strut has slight movement at the upper attachment both (2.5.A.1c)
exhaust system corroded
Nearside Front tyre wearing on outter edge of tread
Offside Front trye worn on inner edge of tread
coolant leak
nearside front tyre wearing on edges of tread
offside front tyre wearing on inner edge of tread
both rear tyres perished
nearside front tyre wearing on outter edge of tread
both rear tyres perishing
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
both rear tyres perished
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
both rear tyres perished
nearside front tyre perished
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HY58 JGU is a 2008 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HY58 JGU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HY58 JGU?
You can check the full history of HY58 JGU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HY58 JGU registered?
HY58 JGU is a 2008 Ford Ka, first registered on 9 September 2008.
Is HY58 JGU safe to buy?
The MOT history for HY58 JGU shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HY58 JGU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HY58 JGU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.