2014 Sym Symply

Fork covers fitted at time of test

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Wheel alignment slightly misaligned (2.4 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp aim too low (4.1.2 (a))

Horn not working (7.7 (a))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Fork covers fitted at time of test

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Riders seat with a defective supporting structure (6.2.5 (a) (i))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Exhaust system insecure rear box broken away mountings broken bolts to mountings loose (6.1.2 (a))

Nearside Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (5.2.3 (e))

exhaust deteriorated.

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))