MOT Status
ExpiredMileage
61,164 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brakes imbalanced across an axle (3.7.B.5b)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Considerable lift in both rear top mounts
Corrossion starting to show at front subframe rear mounts and front seat mount positions
Dashboard/panel lights not working
N/S rear road wheel slightly bent
Some play in front anti roll bar D bushes
Some uneveness of front brake application
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Vehicle structure has slight corrosion (6.1.A.1)
auxilary belt worn
auxilary belt worn
noise when rotating nearside rear wheel
noise when turning steering
vehicle over heated during emmisions test
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Vehicle structure has slight corrosion (6.1.A.1)
noise when rotating nearside rear wheel
noise when turning steering
vehicle over heated during emmisions test
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Rear registration plate deteriorated (6.3.1d)
Rear registration plate insecure (6.3.1b)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
all flexi hoses deteriorated
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both number plates starting to seperate
corrosion floors
corrosion sills
rear number plate loose
six digits of chassis number missing on paperwork
welding to o/s outer sill suspect
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
rear brake application uneven (3.7.B.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both number plates starting to seperate
corrosion floors
corrosion sills
rear number plate loose
six digits of chassis number missing on paperwork
welding to o/s outer sill suspect
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Vehicle structure has slight corrosion (6.1.B.2)
Offside Front Vehicle structure has slight corrosion (6.1.B.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Stop lamp not working (1.2.1b)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Service brake: efficiency below requirements (3.7.B.7)
Front Lower Suspension arm rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
IUI 9584 is a 1998 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying IUI 9584, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of IUI 9584?
You can check the full history of IUI 9584 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was IUI 9584 registered?
IUI 9584 is a 1998 Ford Ka, first registered on 6 October 1998.
Is IUI 9584 safe to buy?
The MOT history for IUI 9584 shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does IUI 9584 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on IUI 9584. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.