MOT Status
ExpiredMileage
140,200 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear chassis has filler
Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front suspension has excessive movement at a suspension ball joint (2.5.A.1c)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear chassis has filler
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside Rear Brake pipe inadequately supported (3.6.B.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Offside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Headlamp aim too high (1.8)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake hose excessively deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Coolant leak
Exhaust has a minor leak of exhaust gases (7.1.2)
Fuel pipe/s corroded
Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Steering pivot point has slight play (2.2.B.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Suspension joint nearside lower dust cover split/missing
Suspension joint offside lower dust cover split/missing
anti rattle clip on brake pads o/s/f damaged-or incorrect
anti roll bar link seems to be close to body mounting areas
cv gaiters slightly loose on drive shaft o/s/f and n/s/f inner clips
flakey corrosion on chassie areas n/s/r and o/s/r
flakey corrosion on front cross member
flakey corrosion on front subframe and rear suspension componanats
flakey corrosion on sill araes o/side
flakey corrosion on sills n/s/r and o/s/r covered with plastic trims
flakey corrosion under wheel arch araes n/s/f and o/s/f
flakey corrosion under wheel arch area n/s/r
floor to sill araes corroded length . n/side and o/side
inner sill araes corroded o/s/r
innrer sill area n/s/r
rear brake backplates holedd and corroded and incomplete
sill holed and corroded n/s/f
welding repairs on vehicle covered with sealer and schutz
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
offside front tyre worn on inner edge
waxoiled underneath covering slight corrosion and welding
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
front brake pads low
offside front tyre worn on inner edge
waxoiled underneath covering slight corrosion
Centre Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Outer Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc slightly pitted (3.5.1h)
Oil leak
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Registration plate lamp not working (1.1.5c)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc slightly pitted (3.5.1h)
Oil leak
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Headlamp aim too low (1.8)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.8)
Parking brake: efficiency below requirements (3.7.B.7)
o/s rear radius arm corrosion starting
How Reliable is the Mazda MX-3?
Based on 67,760 MOT tests across 8,694 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J100 DEG is a 1992 Mazda MX-3 in Red with a 1,845cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 46.2%.
Across all 1992 Mazda MX-3 models, the average MOT pass rate is 61.1% with a typical mileage of 106,076 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-3 fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 4,172 recorded failures. If you're considering buying J100 DEG, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-3 typically stays on UK roads for around 35 years. At 34 years old, this Mazda MX-3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J100 DEG?
You can check the full history of J100 DEG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J100 DEG registered?
J100 DEG is a 1992 Mazda MX-3, first registered on 30 January 1992.
Is J100 DEG safe to buy?
The MOT history for J100 DEG shows 13 tests with a 46.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J100 DEG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J100 DEG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.