2000 Saab 9-3

Front Tyre worn close to legal limit/worn on edge o\s and n\s (5.2.3 (e))

Nearside Front Upper Shock absorbers has a slightly worn bush bearing rough (5.3.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Exhaust has a major leak of exhaust gases 2 places (6.1.2 (a))

Headlamp aim too high o\s and n\s (4.1.2 (a))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Front Tyre worn close to legal limit/worn on edge o\s and n\s (5.2.3 (e))

Nearside Front Upper Shock absorbers has a slightly worn bush bearing rough (5.3.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

reverse lights inop

Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor drain hole corroded (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

eml on

reverse lights inop

Oil leak, but not excessive (8.4.1 (a) (i))

Emissions unable to be completed (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust system insecure (6.1.2 (a))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Front Hydraulic brake calliper insecurely mounted and braking performance affected spring (1.1.16 (c) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Steering component mounting prescribed area is excessively corroded chassis (2.2.C.1h)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

exhaust starting to corrode

various suspension components corroded

rear exhaust box corroded, and various parts of chassis starting to corrode

various suspension components corroded

very slight wear in steering and suspension components

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

o/s/f tyre marked out with green chalk,highlights †small sidewall cuts.

small 10 mm chip in zone a of windscreen and crack lower zone b. †moniter them both please.