2004 Mercedes-benz Clk

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive transmission (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive transmission (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive transmission (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Registration plate incorrect (0.1 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm inner edge (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Oil leak, but not excessive transmission (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak gear box sump ()

Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt both sides (2.4.G.2)

Front Tyre worn close to the legal limit both sides (4.1.E.1)

Rear Tyre worn close to the legal limit both sides (4.1.E.1)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Headlamp excessively deteriorated so that the light output is severely reduced both front (1.7.5a)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Front wheel bearing has slight play both (2.5.A.3c)

Oil leak

Exhaust system not adequately supported (7.1.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Oil leak

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Under-trays fitted obscuring some underside components

Front registration plate character(s) incorrectly spaced (6.3.4a)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Under-trays fitted obscuring some underside components

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)