1996 Honda Civic

Front Both front outer wings damaged / dented but no sharp edges. N/S/F Dorr dented.

Front Registration plate does not conform to the specified requirements Deteriorated / cracked. (0.1 (d))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Lower wheel arch / Sill. (6.2.2 (d) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Front Both front outer wings damaged / dented but no sharp edges. N/S/F Dorr dented.

Front Both front wings damaged but no sharp edges.

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Direction indicator not working Side re peator. (4.4.1 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Obligatory mirror insecure Door mirror. (3.3 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Direction indicator light intensity significantly reduced Lamp insecure. (4.4.3 (a))

Nearside Front Suspension component missing Ball joint split pin missing. (5.3.3 (a) (ii)) DANGEROUS

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure Out of shape. (5.2.3 (d) (ii)) DANGEROUS

Front Both front wings damaged but no sharp edges.

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust heat shield loose

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

exhaust heat shield loose

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

exhaust heat shield loose

Nearside Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Rear fog lamp affected by the operation of another lamp (1.3.2f)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside front brake juddering slightly (3.7.A.2b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Headlamp masks/converters fitted

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Headlamp masks/converters fitted

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)