1992 Mercedes Motorhome

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Leaf spring fractured (5.3.1 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near gas tank (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Prop shaft joint excessively worn (6.1.7 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Hydraulic leak, but not excessive diff seal (8.4.1 (a) (i))

Offside Rear brake cable corroded

prop shaft cv boot damaged

Front Leaf spring has slight side play at eye (anchor) front spring eye bush slightly worn, both sides (2.4.B.4)

Offside Front brake pipe furrel slightly corroded

Offside Rear Inner tyre has low prsssure and nail in tread

headlight converter stickers fitted to lenses

passenger seat position lock mechanism worn

Horn not working (1.6.2a)

Nearside Front Leaf spring has excessive side play at eye (shackle) rear eye bush - worn to extent of spring eye touching hanger above (2.4.B.4)

Nearside Rear position lamp(s) not working surplus (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working surplus (1.2.1b)

Offside Front Brake pipe kinked into caliper (3.6.B.2b)

Offside Front Leaf spring has excessive side play at eye (shackle) rear eye bush- worn to extent of spring eye touching hanger above (2.4.B.4)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Leaf spring has slight side play at eye (anchor) front spring eye bush slightly worn, both sides (2.4.B.4)

Offside Front brake pipe furrel slightly corroded

Offside Rear Inner tyre has low prsssure and nail in tread

headlight converter stickers fitted to lenses

passenger seat position lock mechanism worn

Brake pipe slightly corroded (3.6.B.2c)

Headlamp masks/converters fitted

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Headlamp masks/converters fitted

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Headlamp masks/converters fitted

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Power steering pump has slight seepage from a seal (2.3.3b)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Coolant leak

Brake pipe slightly corroded (3.6.B.2c)

Headlamp masks/converters fitted

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Power steering pump has slight seepage from a seal (2.3.3b)

Headlamp masks/converters fitted

Parking brake lever has no reserve travel (3.1.6b)

Headlamp masks/converters fitted

Exhaust has a minor leak of exhaust gases (7.1.2)

slight scrubbing on front tyres

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

slight scrubbing on front tyres

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear rear brake binding (3.7.B.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Headlamp masks/converters fitted

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre side walls on a twin fitment are contacting each other (4.1.D.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Headlamp masks/converters fitted

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside Windscreen wiper blade insecure (8.2.2)