1992 Ford Transit

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Direction indicator not working Front and back (4.4.1 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension component mounting repair covered in underseal inner wheel arch (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal inner wheel arch (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mount area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor/inner wheel arch (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear cycle rack loose

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both side front bumper mountings (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Play in steering rack inner joint(s) ()

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both side front bumper mountings (6.1.1 (c) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Play in steering rack inner joint(s) ()

Battery insecure and likely to fall from carrier Both (4.13 (a) (ii))

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced cross member/ bumper support (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced cross member/ bumper support (6.1.1 (c) (i))

motorhome waste water pipes under vehicle resting/rubbing against brake pipe

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Body has slight corrosion (6.1.B.2)

Offside Front Body has slight corrosion (6.1.B.2)

Oil leak

Brakes imbalanced across an axle (3.7.B.5b)

Offside Battery insecure (1.9.1)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Body has slight corrosion (6.1.B.2)

Offside Front Body has slight corrosion (6.1.B.2)

Oil leak

Nail in offside front tyre

Oil leak

extensive underside corrosion

o/s battery insecure

o/s/f tyre worn on inner edge

propshaft centre mounts worn

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

heavy corrosion to all chassis and suspension components

o/s battery insecure

o/s/f tyre bald on inside edge

play in propshaft support bearings

o/s/f tyre worn on inner edge

Nearside Inner Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Inner Rear Lower Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Inner Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

brake pipes greased

n/s inner sill at rear corroded

o/s/f tyre worn on inner edge

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

brake pipes greased

n/s inner sill at rear corroded

o/s/f tyre worn on inner edge

body corrosion o/s/r body

extensive underside corrosion

n/s/r tyre cracked on sidewall

extensive welding and underseal on underside.

n/s/r tyre cracked on sidewall.

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

extensive welding and underseal on underside.

n/s/r tyre cracked on sidewall.

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nail in nearside rear tyre

Oil leak

chasis around n/s/r spring hanger corroded thin. †vehicle underside covered in thick underseal.

Nearside rear brake grabbing slightly (3.7.A.5b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Front Upper Steering column universal joint has slight play (2.1.5)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)