1992 Toyota Hiace

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Brake pedal anti-slip provision missing (3.3.A.1b)

Fuel pipe leaking (7.2.3)

Nearside Front Direction indicator insecure (1.4.A.2b)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Passenger's seat insecure (6.2.A.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Steering rack gaiter split (2.2.D.2d)

Power steering pipe(s) or hose(s) leaking (2.3.3b)

Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Anti-roll bar attachment bracket/mounting bolt missing (2.4.G.1)

Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Rear fog lamp insecure (1.3.2a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

osr wing corroded but no sharp edges

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear fog lamp not working (1.3.2b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear position lamp(s) incomplete (1.1.4a)

Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.B3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.B3)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)