1992 Toyota MR2

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

All front suspension and steering arms corroded

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Front Coil spring corroded Both front (5.3.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge Both front (5.2.3 (e))

Fuel Pipe/s corroded ()

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded Both rear (5.3.1 (b) (i))

Rear N/s/r support bar corroded. O/s/r bar missing

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner arches om outer lip join corroded (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor seat mounting point (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor seat mounting point (6.2.2 (d) (i))

bolt on chassis strengtheners on rear rusted through

Nearside Front Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Macpherson strut severely distorted (2.4.G.1)

Front Headlamp not working on dipped beam both (1.7.5a)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Direction indicator not working (1.4.A.2c)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Front Coil spring not correctly located (2.4.C.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

nearside front headlight is cracked

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Parking brake: efficiency below requirements (3.7.B.7)