1992 Ford Transit

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Front Bumper insecure (6.1.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near step (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front crossmember (5.3.6 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above fuel tank (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floorpan under seat (6.1.1 (c) (i))

Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill step, and inner wheel arch (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front crossmember (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of spring hanger (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer not working (3.5 (a))

Body fixing missing, but overall security not significantly reduced 4 fixings missing (6.2.2 (c) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mounting (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive shock mounting (5.3.6 (a) (i))

Offside Rear Position lamp insecure (4.2.1 (c) (i))

Body has slight corrosion (6.1.B.2)

Body has slight corrosion both inner and outer sills (6.1.B.2)

Brake pipe slightly corroded (3.6.B.2c)

Front Body has slight corrosion both foot-step (6.1.B.2)

Front Body has slight corrosion both wheel arch (6.1.B.2)

Front coil spring corroded both (2.4.C.1b)

Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.4.G.2)

Oil leak ()

Play in steering rack inner joint(s) ()

Rear Leaf spring modified but not seriously weakened both (2.4.A.2)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Hazard warning lamps inoperative and repeater (1.4.B.1b)

Offside Side repeater not working (1.4.A.2c)

Rear Brakes imbalanced across an axle 35% (3.7.B.5b)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Brake valve damaged (3.6.A.2c)

Centre Rear Registration plate lamp not working (1.1.5c)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Outer Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)