2000 Peugeot 406

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

suspension components corroded

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))

Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))

Offside Front Anti-roll bar ball joint has slight play drop link (5.3.4 (a) (i))

Nearside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS

Nearside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Nearside Front Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Offside Front Brake hose leaking (3.6.A.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc slightly pitted (3.5.1h)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust system not adequately supported (7.1.1)

Rear Brake pad(s) wearing thin (3.5.1g)