1992 Rover Mini

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Position lamp not working both rear not working when on dip lights (4.2.1 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Rear axle joint slight play

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear axle joint slight play

slight play in both rear radius arm bushes

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt upper inner boot insecure (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint upper inner (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt upper inner boot insecure (2.4.G.2)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded boot floor area corroded & insufficiently repaired (2.4.A.3)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Subframe mounting prescribed area is inadequately repaired floor area (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Rear Sub-frame corroded and seriously weakened (2.4.G.1) DANGEROUS

filler & silicone covering numerous repair patches

rear metal brake pipe slightly corroded

slight play in all front susp joints

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear wheel bearing rough when rotated (2.6.1)

Parking brake: efficiency below requirements (3.7.B.7)

Corossion forming at rear sub frame

Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Indicator tell tale inoperative (1.4.A.2a)

Nearside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Corossion forming at rear sub frame

N/S & O/S REAR QUATER CORRODED

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

N/S & O/S REAR QUATER CORRODED

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Side repeater not working (1.4.A.2c)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

osf floor holed and corroded

osr floor corroded

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Side repeater not working (1.4.A.2c)

Offside Steering rack gaiter split (2.2.D.2d)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

osf floor holed and corroded

osr floor corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Engine/gearbox mounting(s) defective

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Tyre fouling a part of the vehicle (4.1.D.2)

Front Brake pipe slightly corroded (3.6.B.2c)

under vehicle tatty

Front Exhaust system not adequately supported (7.1.1)

Nearside Outer Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Shock absorber has negligible damping effect (2.7.5)