1999 Mazda MX-5

Exhaust emissions - engine idle speed too high (8.2.1.2 (e))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel (6.2.2 (d) (i))

Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel (6.2.2 (d) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Oil leak, but not excessive engine (8.4.1 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened Both (3.5.1i)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake lever has no reserve travel (3.1.6b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

off side head light poor beam patten

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater not working (1.4.A.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

nearside rear tyre inner sidewall has a split that doesnt reach the cords or plies

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim beam image kick up to the offside (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim beam image kick up to the offside (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.2a)