1992 Rover Metro

Nearside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Suspension unit damaged or deteriorated and function is seriously affected (5.3.5 (b) (ii)) DANGEROUS

Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Engine has intermittent misfire

Engine idle speed running slightly too high

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front suspension ride height too low, fluid suspension system requires adjustment

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear valance excessively corroded. It is not considered to be structural or within any prescribed areas

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Engine has intermittent misfire

Engine idle speed running slightly too high

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front suspension ride height too low, fluid suspension system requires adjustment

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear valance excessively corroded. It is not considered to be structural or within any prescribed areas

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear valance excessively corroded

Emissions unable to be completed (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear valance excessively corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear valance excessively corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear valance excessively corroded. It is not considered to be structural or within any prescribed areas

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Previous repair work carried out from inside the vehicle (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear valance excessively corroded. It is not considered to be a prescribed area or structural

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Previous repair work carried out from inside the vehicle (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear valance excessively corroded. It is not considered to be a prescribed area or structural

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting repair covered in underseal floor pan,, repaired from the inside of car (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill panel (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal repaired from inside the vehicle, (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill panel (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Fluid leak, but not excessive (8.4.1 (a) (i))

Rear service brake efficiency requirements only just met. It would appear that the braking system requires adjustment or repair

Exhaust has a minor leak of exhaust gases (7.1.2)

Hydrolastic suspension system has negligible damping effect

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Oil leak

Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

Suspension feels bouncy. The hydrolastic suspension system may need re-pressurizing

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Suspension feels bouncy. The hydrolastic suspension system may need re-pressurizing

Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

rear bumper damaged

slight play in o/s rear radius arm bearings

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

rear bumper damaged

slight play in o/s rear radius arm bearings

Oil leak

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Hazard warning switch faulty (1.4.B.1d)

Offside rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)