MOT Status
ValidMileage
139,884 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Front Outer wings corroded
Front Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Rear Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Front Outer wings corroded
Front Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened Both sides (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Outer Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Nearside Rear Outer Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated Both sides (5.3.4 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension arm ball joint dust cover severely deteriorated Both sides all (5.3.4 (b) (i))
Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Rear Suspension component pin or bush slightly worn Both sides (5.3.4 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brake hose ferrule excessively corroded Both sides (1.1.12 (f) (i))
Nearside Rear Brake hose damaged and likely to fail (1.1.12 (a)) DANGEROUS
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Brake hose damaged and likely to fail (1.1.12 (a)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension arm ball joint dust cover severely deteriorated Both sides all (5.3.4 (b) (i))
Front Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))
Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened Both sides (1.1.14 (a) (ii))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (5.3.6 (a) (i))
Rear Suspension component pin or bush slightly worn Both sides (5.3.4 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement Both inner bushes (2.4.G.2)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement Both inner bushes (2.4.G.2)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Tyre not fitted in accordance with side wall instructions wrong rotation (4.1.D.1f)
Offside Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring broken (2.4.C.1a)
offside front + nearside rear tyre cracking from tread
How Reliable is the Audi A4?
Based on 7,096,957 MOT tests across 571,801 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J2 MHN is a 2007 Audi A4 in Black with a 1,984cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2007 Audi A4 models, the average MOT pass rate is 77.1% with a typical mileage of 95,299 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A4 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 231,238 recorded failures. If you're considering buying J2 MHN, it's worth having these areas checked by a mechanic before committing.
The Audi A4 typically stays on UK roads for around 31 years. At 19 years old, this Audi A4 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of J2 MHN?
You can check the full history of J2 MHN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J2 MHN registered?
J2 MHN is a 2007 Audi A4, first registered on 10 October 2007.
Is J2 MHN safe to buy?
The MOT history for J2 MHN shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J2 MHN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J2 MHN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.