1992 Rover Mini

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

coolant leak

All position lamps not working (1.1.A.3b)

Direction indicators flashing more than 120 times a minute (1.4.A.2g)

Electrical wiring damaged and bare wires exposed dash (1.9.2c)

Electrical wiring damaged, likely to cause a short dash area (1.9.2b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Headlamp not working on dipped beam (1.7.5a)

Headlamp not working on main beam (1.7.5a)

Headlamp switch missing (1.7.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Side repeater insecure (1.4.A.2b)

Offside Front Subframe mounting prescribed area is excessively corroded floor pan (2.4.A.3)

Offside Front constant velocity joint is insecure (2.5.C.1b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Obligatory mirror insecure (8.1.1)

Offside Rear Direction indicators not working (1.4.A.2c)

Offside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Position lamp switch missing (1.1.A.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tie bar/rod slightly distorted (2.4.G.1)

Offside Front Vehicle structure has slight damage (6.1.A.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Hazard warning lamps inoperative (1.4.B.1b)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Side repeater not working (1.4.A.2c)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Side repeater not working (1.4.A.2c)

Offside Front Tie bar/rod slightly distorted (2.4.G.1)

Offside Front Vehicle structure has slight damage (6.1.A.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front registration plate missing (6.3.1a)

Nearside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp aim too high (1.8)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp aim too low (1.8)

Offside Steering rack gaiter split (2.2.D.2d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Vehicle Identification Number not permanently displayed (6.3.5.a)

Front Sub-frame attachment bracket/mounting modified but not seriously weakened (2.4.A.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Wheel/tyre protruding beyond wheel arch

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Rear Parking brake lever has no reserve travel (3.1.6b)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Headlamp not working on main beam (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

o/s/f tyre cracking on side walls

rear brake pipes coated in under seal making inspection difficult

vehicle fitted with different size wheels front to rear

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Horn not working (1.6.2a)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too low (1.8)

Offside Headlamp not working on main beam (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

o/s/f tyre cracking on side walls

rear brake pipes coated in under seal making inspection difficult

vehicle fitted with different size wheels front to rear

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Horn not working (1.6.2a)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Front passenger seat insecure (6.2.3)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Sub-frame synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Upper Front passenger seat insecure (6.2.3)

Nearside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Subframe mounting prescribed area is fractured (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Upper Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

engine stabilizer bar broken insecure front / top