MOT Status
ExpiredMileage
72,437 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive subframe corroded (5.3.6 (a) (i))
Fuel Pipe/s corroded ()
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive subframe corroded (5.3.6 (a) (i))
Tyre slightly damaged/cracking or perishing all four (5.2.3 (d) (ii))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Subframe mounting prescribed area is corroded but not considered excessive subframe corroded (5.3.6 (a) (i))
Fuel Pipe/s corroded ()
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive subframe corroded (5.3.6 (a) (i))
Tyre slightly damaged/cracking or perishing all four (5.2.3 (d) (ii))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear brake disc back plate corroded
Oil leak, but not excessive engine and gear box area (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Slight exhaust Blow center to rear box
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear brake disc back plate corroded
Oil leak, but not excessive engine and gear box area (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Slight exhaust Blow center to rear box
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Nail in tyre ()
Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Vehicle structure has slight corrosion (6.1.B.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Vehicle structure has slight corrosion (6.1.B.2)
Oil leak ()
near side rear brake pad wearing low
Exhaust has a major leak of exhaust gases rear silencer holed (7.1.2)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
near side rear brake pad wearing low
Both front discs slightly pitted
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
front brake discs corroded
near side drive shaft boot clip loose
rear brake discs corroded
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear rear brake binding (3.7.B.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
nearside front tyre slight tear
Centre Exhaust has a major leak of exhaust gases (7.1.2)
nearside front tyre slight tear
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has excessive play in a pin/bearing (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage has excessive play in a pin/bearing (2.4.G.2)
Offside Headlamp aim too low (1.8)
Nail in offside rear tyre
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda MX-3?
Based on 67,760 MOT tests across 8,694 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J420 DGJ is a 1991 Mazda MX-3 in Blue with a 1,845cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 1991 Mazda MX-3 models, the average MOT pass rate is 62.2% with a typical mileage of 108,110 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda MX-3 fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 4,172 recorded failures. If you're considering buying J420 DGJ, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-3 typically stays on UK roads for around 35 years. At 35 years old, this Mazda MX-3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J420 DGJ?
You can check the full history of J420 DGJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J420 DGJ registered?
J420 DGJ is a 1991 Mazda MX-3, first registered on 24 December 1991.
Is J420 DGJ safe to buy?
The MOT history for J420 DGJ shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J420 DGJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J420 DGJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.