1991 Honda NS125

Central Front Lower Tyre worn close to the legal limit (5.2.3 (e))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear suspension slightly corroded link arm (2.4.A.2d)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain slightly tight (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear suspension slightly corroded ling arm and brackets (2.4.A.2d)

no lights fitted at time of test

Front Brake disc(s) slightly worn (3.2.A1l)

Brake pedal has inadequate reserve travel (3.1.3b)

Chain guard insecure (6.2.1c)

Direction indicator missing (1.5.1a)

Drive chain excessively loose (6.2.1d)

Headlamp aim too high (1.6)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake linkage clevis joint excessively worn (3.2.A1d) DANGEROUS

Rear Rear wheel has a loose wheel nut(s) (4.2.3a) DANGEROUS

Drive chain worn but not considered excessive (6.2.1e)

Rear shock absorber has a light misting (2.4.A.1c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Horn not working (1.7.3a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Horn not working (1.7.3a)

Nearside Rear Direction indicator insecure (1.5.3b)

Offside Front Direction indicator insecure (1.5.3b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear suspension component seized (2.4A2a(ii))

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain sprocket worn to excess (6.2.1e)

All position lamps do not illuminate immediately when switched on (1.1.3a)

Front Headlamp dipped beam flickers when tapped lightly by hand (1.2.2c)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) DANGEROUS

Front Front shock absorber has light misting of stanchion (2.3.3)