1992 Volkswagen Caddy

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower arm mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring front mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring rear mount (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower arm mounting (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pipe corroded, covered in grease or other material Front to central (1.1.11 (c))

Exhaust system corroded

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Various underside corrosion

Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive leaf spring (5.3.6 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Speedometer cannot be illuminated (7.8 (c) (ii))

Nearside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive leaf spring (5.3.6 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Tyre slightly damaged/cracking or perishing and both rears (5.2.3 (d) (ii))

corrosion both rear inner arches, not within a prescribed area

slight corrosion o/s/f inner arch near front lower arm mount, not excessive

slight rear brake imbalance, n/s/r just met minimum efforts

various underside surface corrosion and under seal/ painted

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

rear tyres slightly perished and cracked/ cut

slight corrosion o/s/f lower arm front bush/ chassis area

slight play both front top strut mounts

various underside surface corrosion and undersealed/ painted items

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

rear tyres slightly perished and cracked/ cut

slight corrosion o/s/f lower arm front bush/ chassis area

slight play both front top strut mounts

various underside surface corrosion and undersealed/ painted items

1 X centre exhaust rubber mount missing

both front to joiner brake pipes slightly corroded

engine idle slightly rough and CO % just within maximum limits

n/s/f brake hose may rub on shocker, recommend securing

o/s/f brake hose slightly perished

o/s/f tyre perished

o/s/r brake flexi hose slightly loose

slight play both front top strut mounts

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

1 X centre exhaust rubber mount missing

both front to joiner brake pipes slightly corroded

n/s/f brake hose may rub on shocker, recommend securing

o/s/f brake hose slightly perished

o/s/f tyre perished

o/s/r brake flexi hose slightly loose

slight play both front top strut mounts

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Horn not working (7.7 (a) (ii))

Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (3 x plates) (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (3 x plates) (5.3.6 (a) (i))

Offside Rear Bumper insecure (6.1.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen wiper not working (3.4 (a))

underside of vehicle corroded

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear bumper loose

Brake load sensing valve seized (3.6.E.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Lower Body has a sharp edge caused by corrosion wing (6.1.C.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Vehicle structure has slight corrosion several areas of corrosion under vehicle (6.1.A.1)

Vehicle structure has slight damage several areas of corrosion underside of vehicle (6.1.A.1)

Spare tyre split and showing cords

Brake load sensing valve linkage seized (3.6.E.3)

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front and rear of inner arch (6.1.A.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Speedometer cannot be illuminated. (6.7.3)

rear brake application uneven (3.7.B.2)

Spare tyre split and showing cords

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Horn not working (1.6.2a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Rear fog lamp not working (1.3.2b)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

rear brake application uneven (3.7.B.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Unable to check all brake pipes and chassis due to excessive amount of underseal having been applied

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Rear Brake pipe inadequately clipped (3.6.B.1)

Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust engine idle speed too high (7.3.A.2a)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Bonnet cannot be secured in the closed position (8.4.1)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Driver's door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)